For monitoring and recording ECG, heart rate, respiration, blood pressure, and blood oxygen saturation. Bluetooth 4.0 technology allows data transfer to an App available on the App Store, does not support Android. Communication protocols available upon request.

Meditech Smart Patient Monitor

Phone not included

Technical specifications

ECG

• ECG waveform gain: 0.5 mm/mV, 1.0 mm/mV, 2.0 mm/mV

• Scan speed: 7.5 mm/s, 15 mm/s

• Alarm range and heart rate:

- Adult: 30 ~ 250 bpm (beats/minute)

- Resolution: 1 bpm (temps/minute)

- Sensitivity: > 200 uV (peak-to-peak value)

• Trigger level threshold: 200 nV (Lead II)

• Input impedance: > 5 M O

• Common mode rejection ratio: = 90 dB

• Leakage current: < 10 uA

• Input signal range: ± 5 mV

• ECG abnormalities: tachycardia, bradycardia, VPC, bigeminal rhythm, trigeminal rhythm, RonT, VTAC, beat slip, and sinus arrest

• Response frequency:

- Filter: 0.67 - 40 Hz

- Protection level: 0.05 - 40 Hz

- Detection: 0.05 - 100 Hz

• Calibration signal: 6 mm/mV

• S-T segment measurement:

- Measured range: - 2.0 mV - + 2.0 mV

- Accuracy: -0.8 mV - +0.8 mV; ±0.02 mV or ±10%

Non-invasive blood pressure (NIBP)

• Measurement: oscillometric method

• Measurement range: 30 ~ 280 mmHg ± 5 mmHg or ± 5 %

• Overvoltage protection: yes

• Alarm: systolic/diastolic error alarm of ± 2 mmHg premature atrial event function

• Measurement threshold: 135 ~ 215 mm

Oxygen saturation (SpO2)

• Measurement range: 40-99% ± 2% (90-99%), ± 4% (70-89%)

• Alarm range: 50-99% ± 2% (30-80 bpm) ± 4 (80-150 bpm) ± 5 (150-240 bpm)

Heart rate

• Measurement range: 30-240 bpm

• Dimensions: 7 x 7 x 2.6 cm (strap not included)

• Net/gross weight: 130/500 g

Standard equipment

• 3 ECG lead cables

• Blood pressure measurement cuff (for circumference 18-26 cm)

• Rubber oxygen probe (length 33 cm)

• 5V/1A charger

• 3.7V 1000 mAh lithium battery (for 8 hours of continuous operation)