Meditech Monitor Ασθενή
Τυπικά χαρακτηριστικά ECG, SPO2, NIBP, RESP, TEMP, PR
Read more
Advanced patient monitor with 12.1-inch screen with ECG, SpO₂, NIBP, RESP, and EtCO₂ options
12.1-Inch Multi-Parameter Patient Monitor is an advanced bedside monitoring solution designed for hospitals, emergency care, operating rooms, and intensive care environments. It provides continuous monitoring of essential vital signs with a large, clear display and expandable options for advanced patient assessment.
All Meditech customers and healthcare professionals can submit equipment service tickets through the Customer Service Portal.
To receive two additional months of extended warranty, please register your product here.To browse all support resources and contact information, please visit the Support Center.
Coming soon.
Discover the advanced capabilities that set our products apart
Detailed technical specifications and performance parameters
| Parameter | Specifications |
|---|---|
| Lead Configuration | 5 Leads (R, L, F, N, C / RA, LA, LL, RL, V) |
| Lead Selection | I, II, III, aVR, aVL, aVF, V |
| Waveform Display | 2 Channels |
| Lead Configuration | 3 Leads (R, L, F / RA, LA, LL) |
| Lead Selection | I, II, III |
| Gain | ×2.5, ×5, ×10, ×20 mm/mV |
| Heart Rate Range | Adult: 30–300 bpm / Neo-Ped: 30–350 bpm |
| Heart Rate Accuracy | ±1% or ±1 bpm |
| Resolution | 1 bpm |
| Sensitivity | >200 μV p-p |
| Differential Input Impedance | >5 MΩ |
| CMRR | Monitoring >105 dB / Operating >105 dB / Diagnostic >85 dB |
| Electrode Offset Voltage | ±300 mV |
| Leakage Current | <10 μA |
| Baseline Recovery | <10 s after defibrillation |
| ECG Signal Range | ±8 mV (Vp-p) |
| Bandwidth | Surgery: 1–15 Hz / Monitoring: 0.5–35 Hz / Diagnostic: 0.05–100 Hz |
| Signal Calibration | 1 mV (Vp-p), ±5% Accuracy |
| ST Monitoring Range | -2.0 to +2.0 mV |
| Arrhythmia Detection | Asystole, VFib/VTAC, Couplet, Bigeminy, Trigeminy, R on T, VT >2, PVC, TACHY, BRADY, Missed Beats, PNP, PNC |
| T-Wave Suppression | 1.2 mV |
| HR Average | Average of last 6 R-R intervals |
| Display Refresh Rate | 1 s |
| Alarm Function | Available |
| Verification Function | Available |
| Condition | Response |
|---|---|
| Ventricular Bigeminy | 80 bpm |
| Ventricular Bigeminy Alternate Slow | 57 or 63 bpm |
| Ventricular Bigeminy Alternate Fast | 122 or 123 bpm |
| Bidirectional Systole | 95 bpm |
| HR Change Response (80→120 bpm) | Average 3.7 s (Range 3.2–4.1 s) |
| HR Change Response (80→40 bpm) | Average 4.7 s |
| Parameter | Specifications |
|---|---|
| Measurement method | Oscillometric |
| Modes | Manual / Automatic / STAT |
| Automatic measurement interval | 1, 2, 3, 4, 5, 10, 15, 30, 60, 90, 120, 240, 480, 960 minutes |
| STAT mode duration | 5 minutes |
| Pulse rate range | 40–240 bpm |
| Alarm type | SYS, DIA, Mean |
| Patient mode | SYS | DIA | Mean |
|---|---|---|---|
| Adult | 40–270 mmHg | 10–215 mmHg | 20–235 mmHg |
| Pediatric | 40–200 mmHg | 10–150 mmHg | 20–165 mmHg |
| Neonatal | 40–135 mmHg | 10–100 mmHg | 20–110 mmHg |
| Parameter | Specifications |
|---|---|
| Accuracy | 1 mmHg |
| Accuracy | Maximum average error ±5 mmHg / Maximum standard deviation ±8 mmHg |
| Overpressure protection | Adult: 297±3 mmHg / Pediatric: 240±3 mmHg / Neonatal: 147±3 mmHg |
| Parameter | Specifications |
|---|---|
| Channels | Two channels |
| Measurement & Alarm Range | 0–50°C |
| Accuracy | 0.1°C |
| Accuracy | ±0.1°C |
| Update interval | Approximately 1 second |
| Average time constant | <10 s |
| Parameter | Specifications |
|---|---|
| Channels | Two channels |
| Supported parameters | ART, PA, CVP, RAP, LAP, ICP, P1, P2 |
| Parameter | Range |
|---|---|
| Art | 0–300 mmHg |
| PA | -6–120 mmHg |
| CVP / RAP / LAP / ICP | -10–40 mmHg |
| P1 / P2 | -10–300 mmHg |
| Parameter | Specifications |
|---|---|
| Sensitivity Sensor | 5 μV/V/mmHg |
| Impedance | 300–3000 Ω |
| Accuracy | 1 mmHg |
| Accuracy | ±2% or ±1 mmHg |
| Refresh Interval | Approximately 1 second |
| Parameter | Specifications |
|---|---|
| Display Type | 12.1" Color TFT Display (Sharp Japan) |
| Waveform display | Up to 7 waveforms |
| Alarm indicator | 1 LED (yellow/red) |
| Power indicator | Green LED |
| Battery charging indicator | Yellow LED |
| Audio modes | 3 alarm audio modes |
| Parameter | Specifications |
|---|---|
| ECG output | BNC |
| Output amplitude | 1 V/mV |
| Accuracy | <5% |
| Impedance | 50 Ω |
| Signal delay | <20 ms |
Compatible accessories to extend functionality
| Item | Quantity |
|---|---|
| ECG cable (5 leads) | 1 piece |
| SpO₂ cable (adult) | 1 piece |
| TEMP probe (adult) | 1 piece |
| NIBP cuff (adult) | 1 piece |
| NIBP tube (150 cm) | 1 piece |
| Grounding cable | 1 piece |
| Power cable | 1 piece |
| Cleaning cloth | 1 piece |
Core specifications at a glance
Portable patient monitor NIBP and SpO₂, a reliable and integrated vital signs monitoring device designed for accurate measurement of non-invasive blood pressure, oxygen saturation (SpO₂), and pulse rate.
Learn more
The ambulatory blood pressure monitoring device combines continuous blood pressure monitoring and oxygen saturation in a compact design.
Learn more
The smart digital blood pressure monitor provides accurate and convenient blood pressure monitoring with a large LED display, bilingual voice guidance, and memory storage for three users.
Learn more
The digital blood pressure monitor is an advanced and easy-to-use device designed for accurate measurement of blood pressure...
Learn more
The ambulatory blood pressure monitoring device for outpatients is a compact and easy-to-use device designed for continuous 24-hour blood pressure monitoring.
Learn more
The 32-channel EEG Brain Mapping System is an advanced digital electroencephalography device designed for comprehensive brain activity monitoring and neurological diagnosis.
Learn moreΤυπικά χαρακτηριστικά ECG, SPO2, NIBP, RESP, TEMP, PR
Read more